background image

26

HOW TO ORDER

REPAIR PARTS

MODEL NO.

944.369341

Each lawn mower has its own model number.  Each engine has its own
model number.

The model number for your lawn mower will be found on a decal attached
to the rear of the lawn mower housing.

The model number for your engine will be found on the blower housing of
the engine.

All parts listed herein may be ordered from any Sears Canada, Inc. Service
Centre/Department and most Retail Stores.

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING
INFORMATION:

PRODUCT - LAWN MOWER

MODEL NUMBER - 944.369341

ENGINE MODEL NO. - 143.996522

PART NUMBER

PART DESCRIPTION

Your Sears merchandise has added value when you consider Sears has
service units nationwide staffed with Sears trained technicians...
professional technicians specifically trained to insure that we meet our
pledge to you, we service what we sell.

NEED A PART?

SEARS HAS ACCESS TO OVER 800,000 PARTS

WHETHER IT'S A SPARK PLUG OR LAWNMOWER BLADE.

SEARS PARTS AND SERVICE CAN SUPPLY YOU WITH

TOP QUALITY REPAIR PARTS FOR ALL YOUR PRODUCTS.

JUST CALL ONE OF THE FOLLOWING NUMBERS TO PLACE YOUR

ORDER.  IF CALLING LOCALLY:

Regina - 566-5124

Montreal - 333-5740

Toronto - 744-4900

Halifax - 454-2444

Kitchener - 894-7590

Ottawa - 738-4440

Vancouver - 420-8211

ALL OTHER AREAS CALL 1-800-665-4455

®

6.5 HORSEPOWER
21" MULTI-CUT
POWER PROPELLED
ROTARYLAWN MOWER

OWNER’S

MANUAL

Summary of Contents for 944.369341



























Reviews: