![background image](http://html1.mh-extra.com/html/garland/rtcs-gme36-i14c/rtcs-gme36-i14c_installation-operation-and-maintenance-manual_3757987028.webp)
28
Part Number 4533030 Rev 1 07/2017
Maintenance
Section 4
Daily Cleaning and Maintenance
GLASS CLEANING
NOTE: The cleaning of Ceran® glass is identical to cleaning
other similar glass surfaces. You may use any regular glass
cleaning products available from a hardware store.
You may use a razor blade scraper or a non-scratching
sponge to remove tough residues. When scraping, place
your razor blade scraper at an angle of about 20
o
to 30
o
from the glass. Then wipe clean the glass with a cleaning
product.
20
o
- 30
o
VISUAL INSPECTION OF SILICONE SEAL
Inspect the silicone seal around the glass perimeter. Call for
service immediately if you notice:
• Cracks on the silicone seal.
• The silicone seal comes away from the glass/housing or
moves when you press down on the seal.
n
Warning
Inspect Silicone Seal
When the silicone seal is broken, water penetration
could cause the appliance to fail, and any malfunction
could cause personal harm.
STAINLESS STEEL
1. Clean the stainless steel surface using a soft cloth with
a mild detergent and/or a food-safe liquid cleaner
designed to clean stainless steel.
2. Wipe dry with a soft clean cloth.
NOTE:
• If it is necessary to use a non-metallic scouring pad,
always rub in the direction of the grain in the metal
to prevent scratching. Wash a small area at a time and
rinse the washed area with a clean sponge dipped into a
disinfectant and wipe dry with a clean soft cloth before
it can dry.
• Use only wood, or plastic tools to scrape off heavy
deposits of grease or oil. Do not use ordinary steel
scrapers or knives as particles of iron may become
embedded and rust. NEVER USE STEEL WOOL.
OVEN
• Clean the oven interior using the same method
mentioned for cleaning stainless steel.
• Clean the oven racks and guides with hot soapy water
and dry thoroughly.
NOTE: Any food or other matter which becomes lodged in
the fan must be removed
as soon as the oven and oven
fan are OFF and the oven is cool
.
CONTROL KNOBS
The control knobs are fitted tightly to the shafts. If
necessary, pull knobs out to clean. When replace, ensure
the knobs are oriented correctly.