![background image](http://html1.mh-extra.com/html/garland/rtcs-gme36-i14c/rtcs-gme36-i14c_installation-operation-and-maintenance-manual_3757987019.webp)
Part Number 4533030 Rev 1 07/2017 19
Section 3
Operation
Controls
3
2
2
2
2
1
Important
Shutdown using circuit breaker
For emergency shutdown, switch off the circuit breakers
that are located behind the kickplate. Do not open any
other panels. Call for service.
DANGER
Disconnect electric power at the main power disconnect
for all equipment being serviced.
Failure to disconnect the power at the main power
supply disconnect could result in serious injury or death.
The power switch DOES NOT disconnect all incoming
power.
Contact an authorized service agency for assistance.
1
AIR MANAGEMENT SYSTEM
Incorporated in the Range are internal
cooling fans to manage airflow efficiently.
These cooling fans are turned on
automatically when:
• Any one of the induction hob is ON.
• Oven COOK/COOL switch is “I” (ON).
• Internal thermostat reads above set
temperature.
NOTE
When the RED indicator lamp is ON, the
cooling fans might have failed and/or
internal temperature is too high:
• IMMEDIATELY, TURN OFF THE OVEN if it is
on.
• Refer to section 5 Troubleshooting.
2
INDUCTION CONTROL AND INDICATOR LAMP
Power Level Settings
Set the desired power level by turning the control knob and
the appliance is immediately ready for operation.
• Power level (1) = lowest power
• Power level (12) = highest power
ON Position
Any position
between
power levels
“1” to “12”.
Indicator
lamp is on.
OFF Position
“0” on dial is
pointing to
the Indicator
lamp. The
lamp is off.
When the indicator lamp shines continuously, energy is
being supplied to the bottom of the cookware.
The Power Diagram (below) show that the difference in
power output between two higher power levels is much
larger than that between two lower power levels.