Garland MWE3S Service Manual Download Page 32

Page: 32 / 72

SERVICE MANUAL

GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION

PART #4526396 (03/30/10)

Page 32

CONTROL PROGRAMMING

(continued)

To�Add�NEW�Menu�Items

The following programming instructions serves as a GUIDE for
programming the basic settings for CLAM menu items.

1. PRESS and HOLD the button for approximately 3

seconds. Controller will display previously selected

menu item and its corresponding item number.

2. PRESS the or button until “Opt menu # - CLAM” is

displayed on the controller.

3. PRESS the button. The controller will display

“PRODUCT”

4. PRESS and HOLD the button. The currently select

menu item name will begin to flash.

5. To spell out the product name:

a. Use the or arrow buttons to scroll through

the character library.

b. PRESS or to scroll right or left.
c. PRESS the button to save the new menu item

name.

6. PRESS the button. “Display Active” will be displayed.

7. PRESS the button. “NO” will begin to flash.

8. PRESS the button. “NO” will change to “YES”.

9. PRESS the button to save the new setting.

10. PRESS the button. “GRILL SETPT” will be displayed.

11. PRESS the button. The temperature will begin to

flash.

12. Using the or button, change the temperature set

point to the new desired temperature.

13. PRESS the button to save the new temperature set

point.

14. PRESS the button. “PLATSETPT” will be displayed.

15. PRESS the button. The temperature will begin to

flash.

16. Using the or button, change the temperature set

point to the new desired temperature.

17. PRESS the button to save the new temperature set

point.

18. PRESS the button until “GAP MULTI/PR START”

appears in the display.

19. PRESS the button. The gap setting will begin to

flash.

20. Using the and DOWN button, change the gap

setting to the desired setting.

21. PRESS the button to save the new gap setting.

22. PRESS the button 2X to exit and return to the normal

operating mode.

To�Restore�Factory�Defaults�for�All�Product�Menu�Items

1. With the controller display ON and either displaying the

current menu item or displaying “OFF,” PRESS and HOLD

the button for approximately 3 seconds. Controller

will display previously selected menu item and its

corresponding item number OR “Standby / Menu Item.”

2. PRESS the AND arrow buttons TOGETHER.

“CONFIGURE” will appear in the display.

3. PRESS the arrow button. “Setup” will appear in the

display

4. PRESS the button. “Temperature Unit” will appear in

the display.

5. PRESS the button 6x. The controller will display

“Reload Defaults – NO.”

6. PRESS the button. “NO” will begin to flash.

7. PRESS the button. “NO” will change to “YES”.

8. PRESS the button. The system will Reload the MENU

items to factory default settings.

9. Wait 15-20 seconds. The control then automatically

returns to OFF mode.

To�Restore�Factory�Defaults�for�All�Functions

1. Ensure the main power is turned off by turning the

main power switch to the OFF mode.

2. PRESS the AND arrow buttons TOGETHER, while

cycling main power ON with the main power switch.

The control will display “PASSWORD”

3. Within 3-5 seconds, press the following keys in this

sequence:

4. Upon successful completion, the controller will display

FULL DEFAULTS

5. Wait 15-20 seconds. The control then automatically

returns to OFF mode.

Summary of Contents for MWE3S









































































Search results

Summary of Contents for MWE3S

Reviews:

Related manuals for MWE3S

Brands by name

Popular brands

Garland MWE3S, Service Manual

Search results

Summary of Contents for MWE3S

Reviews:

Related manuals for MWE3S

Brands by name

Popular brands