Garland MWE3S, Service Manual

Page: 25 / 72

PART #4526396 (03/30/10)
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION SERVICE MANUAL
Page 25
OPERATING PROCEDURES
(continued)
4. Press the GREEN pushbutton to initiate a cook cycle.
The platen will lower, and recognize the product that
has been loaded on the grill.
5. Alarm will sound when the cook cycle is complete.
6. Remove product and clean grill to prepare for the next
cook cycle.
Lunch In Auto mode
Note:�
Switching from breakfast to lunch menu items will
take approximately 10 minutes to heat to the appropriate
temperatures.
1. Select PM mode. Press and hold the button.
2. Select Auto mode. Press and hold the button. The
control will display “PM / AUTOMATIC.”
3. Following the lay patterns shown on the following
page, load product on the grill.
4. Press the GREEN pushbutton to initiate a cook cycle.
The platen will lower, and recognize the product that
has been loaded on the grill.
5. Alarm will sound when the cook cycle is complete
6. Remove product and clean grill to prepare for next
cook cycle.
Transition Cooking
Approximately 30 minutes before changing to the lunch
menu, perform the following:
1. PRESS the button (to display the upper platen
temperature).
2. Press the button.
3. The upper platen indicator will turn on. The upper
platen will heat to 425 degrees F (217 degrees C)
the platen will maintain this set temperature unless
another menu item is selected..
PRODUCT RECOGNITION
This Garland Clamshell grill is equipped with Product Recognition Controls (PRC). This new technology allows the user to
simply start a cook cycle WITHOUT having to select a specific menu item. The PRC will recognize the product thickness
by utilizing switches inside the upper platen and the magnets mounted on the platen arms. Once the PRC calculates
the thickness of the product that’s been loaded, it will look up product from the product range library (below), and
automatically select that product.
MENU�ITEM MIN�GAP MAX�GAP
Breakfast�Library�Recommended�Ranges
Strip Bacon .010 .130
Sausage Clam .210 .405
Steak Clam .430 .480
MENU�ITEM MIN�GAP MAX�GAP
Lunch�Library�Recommended�Ranges
10:1 Clam .160 .345
4:1 Clam .365 .560
Strip Bacon .001 .130
While cooking in Automatic Mode, the platen will lower and rest on the top of the product. The platen arms will continue
to move in a downward motion performing various calculations to measure the thickness of the product that has been
placed. In the event “ Product�Not�Recognized ” or the wrong product is recognized, perform an Forced Auto Calibration.
Performing an Auto Force Calibration will reset the platen to the grill surface.
TO PERFORM FORCED AUTO CALIBRATION
1. PRESS and HOLD the and buttons together. The control will display “AUTO GAP FORCE - NO”.
2. PRESS the button. The “NO” will begin to flash.
3. PRESS the button. The flashing “NO” will change to flashing “YES”.
4. PRESS the button. The�upper�platen�will�immediately�begin�to�lower�and�perform�an�auto�calibration�routine .