![background image](http://html1.mh-extra.com/html/garland/mco-gd-10ce/mco-gd-10ce_original-user-manual_3699721002.webp)
Page 2
Part # 1955201 Rev. 7 (11/28/12)
THE BURNER PRESSURE IS FACTORY SET AND LOCKED. IT MUST NOT BE ADJUSTED BY THE USER.
A COMPETENT PERSON MUST MAKE INSTALLATION OF THIS OVEN IN ACCORDANCE WITH THE LOCAL CODES OF
THE COUNTRY OF DESTINATION.
THIS OVEN MUST BE MAINTAINED AND SERVICED BY A FACTORY CERTIFIED SERVICE ENGINEER. A QUALIFIED GAS
ENGINEER MUST MAKE ALL BURNER ADJUSTMENTS AND SETTINGS. GARLAND RECOMMENDS PERIODIC SERVICE
CHECKS BE PREFORMED EVERY SIX MONTHS.
THIS OVEN MUST ONLY BE OPERATED BY QUALIFIED PERSONS. DO NOT OPERATE THE OVEN WITHOUT READING
THIS OPERATION MANUAL.
DO NOT OPERATE THE OVEN UNLESS IT HAS BEEN PROPERLY INSTALLED AND EARTHED.
DO NOT OPERATE THE OVEN UNLESS ALL SERVICE AND ACCESS PANELS ARE IN PLACE AND FASTENED PROPERLY.
THE OVEN DOES NOT EMIT AIRBORNE NOISE IN EXCESS OF A CONTINUOUS A-WEIGHTED SOUND PRESSURE LEVEL
OF 75dB(A).
IT IS THE RESPONSIBILITY OF THE SUPERVISOR OR EQUIVALENT PERSON TO ENSURE THAT USERS OF THIS
EQUIPMENT WEAR SUITABLE PROTECTIVE CLOTHING AND TO DRAW ATTENTION TO THE FACT THAT SOME PARTS
WILL BY NECESSITY BECOME VERY HOT, AND WILL CAUSE BURNS IF TOUCHED ACCIDENTALLY.
WARNING: THIS APPLIANCE MUST NOT BE CLEANED WITH A PRESSURE JET!
IMPORTANT INFORMATION