User Guide
EdgeLens® Focus | INT10G12xxBP | 4.22.1
2. Select the Save option.
Add Entity
An entity must have at least one inline appliance port member to be considered part of the chain. Entity
inline appliance port members are added as member pairs. If the ports for an entity inline appliance
member are configured as packet broker ports they may not be added back to the entity until they are
deleted as packet broker ports.
1. Select the up arrow in the Entities panel, 1, 2, 3, 4.
2. Select the Save option.
Remove Entity Inline Appliance Member
Entity inline appliance port members are removed as member pairs. If an entity inline appliance port
member is removed, the ports may be configured as packet broker ports.
1. Entity inline appliance members may be removed by selecting the red X for the desired inline appliance
port member(s).
2. Select the Save option.
Add Entity Inline Appliance Member
Entity inline appliance port members are added as member pairs. If the ports for an entity inline appliance
port member are configured as packet broker ports they may not be added back to the entity until they
are deleted as packet broker ports.
1. Select the up arrow in the Entities panel. The entity inline appliance members will appear.
2. Select the Save option.
Taps Settings
The following configuration options may be displayed, modified, enabled or disabled.
No. Of Lost HB Packets
LFP
Heartbeats per Second
Reverse Bypass
Tap Modes
Bypass Threshold
Fail Mode
1. Select Settings.
The Configure Tap Settings panel will be displayed.
2. Enter the No. Of Lost HB Packets. Default is 10.
This is the number of heartbeats that must be lost on any inline appliance port member before
any entity will remove the inline appliance from the load balance group.
3. Enter the Heartbeats per Second. Default is 10.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
45