User Guide
EdgeLens® Focus | INT10G12xxBP | 4.22.1
3. Select the red X to remove.
4. Place the cursor on the Inline Appliance option. Select with the left mouse button. Drag the Inline
Appliance option to the blue box and release. The next available vertical port pair will be added.
Repeat this step to apply up to four inline appliance ports per tap.
5. Select the red X to remove.
6. Select Save to save updates.
The Bypass Taps panel will be displayed. Inline will be displayed.
7. Place the cursor on the tap and double-press the left mouse button.
The Tap panel will be displayed. Green indicates Active.
8. Select Cancel to return the Bypass Taps panel.
Taps Settings
The following configuration options may be displayed, modified, enabled or disabled.
Tap Modes
Fail Mode
LFP
Reverse Bypass
Bypass Threshold
1. Edit the Tap Settings, by placing the cursor on any tap and double-press the left mouse button.
The Tap panel will be displayed.
2. Select Edit Tap Settings.
The Configure Inline Appliance panel will be displayed.
3. Select the Tap Mode.
Active
Allows the tap to automatically switch from inline to bypass if an issue occurs
with the inline appliance port(s), loss of link or heartbeats, defined by the bypass
threshold value, 1-4. When the issue with the inline appliance port(s) is resolved,
have link and heartbeats, the tap will automatically switch back to inline.
Figure 18 Load Balance Tap Mode (Inline)
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
38