Operating Instructions
RTCSmp Built-In Module-Line Dual/Quad Cooktops
34
Part # 4532415 Rev 1 (12/12/13)
CORRECT.
One pan for each ROUND coil. Each pan is placed in the
center of the cook-zone.
CORRECT.
One large pan is placed in the center of a cook-zone for
RECTANGULAR coils.
CORRECT.
Multiple pans are placed within one cook-zone for
RECTANGULAR coils.
IMPORTANT:
When multiple pans are used on
rectangular coils, do not let the pans touch each other as the pans
might fuse if there is excessive heat.
6.3
Power Control
Set the desired power level by turning the control knob and the unit is
immediately ready
for operation. When
the green indicator lamp lights up, energy is being transferred to the cookware.
ON-Position
Any position where
“0” is not pointing to
the LED light. The
light is on.
OFF-Position
“0” points to the LED
light. The light is off.
Set and adjust the power level by turning the control knob:
•
Position (1) indicates minimum power.
•
Position (12) indicates maximum power.
The following Power Diagram indicates that when you increase the power level, the power output does not
increase linearly. The difference in power output between two higher power levels is much larger than that
between two lower power levels.
