Installation
RTCSmp Built-In Module-Line Dual/Quad Cooktops
22
Part # 4532415 Rev 1 (12/12/13)
D.
Examine the Ceran glass before installation.
i.
Then carefully lower the glass onto the silicone stripe.
NOTE:
When installing multiple glass-tops on the same counter, ensure to orient all the logos on
the glass-tops the same direction.
ii.
Align the edges of the glass with the edges of the countertop cut-out.
E.
Level the glass by adjusting the screws.
F.
To provide a water tight seal, apply silicone sealant completely around, filling any gaps between the
glass and the counter-top surface.
IMPORTANT
Wait for the silicone adhesive to cure before installing the coil carrier sheet.
To install the coil carrier sheet:
G.
Loosen the two screws to free the retaining rails. The rails are hinged at the hooks at the back.
H.
Guided by the retaining rails, carefully insert the back end of the coil carrier sheet into the frame. The coil
and sensor connectors should be facing the front. The retaining rails provide additional support to the
coil carrier sheet.
