Installation
RTCSmp Built-In Module-Line Dual/Quad Cooktops
30
Part # 4532415 Rev 1 (12/12/13)
3.
Connecting the components:
IMPORTANT:
•
Always connect the cables according to the labels affixed next to the connectors and on
the cables.
•
The cables—coils, sensors, CAN/BUS, mains— must be connected correctly.
•
Ensure the insertion tongues of the RJ-45 cable (CAN/BUS) are fully engaged.
•
The coil and sensor cables must be routed and MUST NOT rest on one another.
•
The coil sensor and RJ45 cables must be routed and MUST NOT rest on one another.
•
All the coil/sensor connectors have to be connected correctly before turning on the
unit.
Please review the components and cable connections charts in section
4.5 Models, Components and
Cable Connections
.
4.
Connect the unit to the power supply.
5.
Perform the Function Test. See chapter
5 Function Test
.
