INSTALLATION OPERATION MANUAL
GARLAND ELECTRIC CLAMSHELL BROILER, CXBE12 MODEL
Part #4532096 Rev 6 (25 Oct 2013)
Page 24
19. Lift up the motor, and spray with degreaser
solution to the wheel blower. It is
recommended to perform cleaning over a
towel/rug/paper for easy disposal of the falling
debris. Rest the upper blower assembly safe
with all other parts are cleaned and returned.
20. Remove exhaust
tray, wring out a
clean, sanitized
towel and spray
with degreaser
solution. Turn towel
over and wipe
surface to remove
grease.
21. Spray the exhaust tray and housing with
degreaser solution. They can be cleaned in the
sink to remove grease/debris.
22. Place exhaust tray,
housing & motor in
place and tighten
the (3) thumb
screws manually by
hand.
B. Upper broiler housing
Once a week, additional cleaning is necessary
to avoid build-up behind upper broiler grate.
During daily cleaning, perform these steps
after scraping and wiping all grates and before
raising lower broiler grates for cleaning.
23. Release upper broiler
grate in order for
surfaces behind grate
to be cleaned.
•
With the broiler
upper platen in the
raised position, rest
gloved hand in place
to catch upper grate
when it is released.
•
Turn knob counterclockwise until grate is
released. This may require 5 or more turns to
unlatch
24. Wipe surface with
damp towel, until
clean. Use detailing
tool if excessive
carbon buildup is
present.
25. Remove upper
grease shield out
of the broiler lid.
Wash, rinse, sanitize,
and air dry until
compartment is dry.
26. Clean areas not
accessible during
daily broiler cleaning.
Wipe inside of
stainless steel edges
around broiler grate.
CLEANING AND MAINTENANCE,
continuation
