INSTALLATION OPERATION MANUAL
GARLAND ELECTRIC CLAMSHELL BROILER, CXBE12 MODEL
Part #4532096 Rev 6 (25 Oct 2013)
Page 16
LATCH SYSTEM INTERNAL OPERATION - B, LATCHING
HOT SURFACE
Grill Temperatures
Will Cause Severe
Burns
PPE
Approved Personal
Protective Equipment
Must be worn
How to latch the top grate to cowl assembly.
While pulling the knob, with the other hand lift up the
upper grate, (as shown in fi gure #4).
Note:
Ensure the upper grease shield is in the right
place aligning the two notches as shown above.
Pull
Figure #4
shows the grate getting in place to be latched.
Push
Figure #5
shows the latch system passing through safety
lock area.
Push knob until pass the safety lock and into the locking
position, moving the grate slightly up/down.
Figure #6
shows the latch completely latching the grate
to the cowl assembly. Turn knob approximately 5 turns,
until you feel resistance.
Important note: Hand support should be maintained
until the grate is fully locked in place, to prevent the
sudden drop of the grate assembly.
How to check:
Knob should be turned
clockwise only fi nger tight.
Ensure the bracket is tight,
in place and there is no
gap on either side of the
bracket.
Incorrect:
Grate not in place, front side too low compared to rear
side.
Correct:
Grate in place, with consistent gap.
