English
49/122
HAZARD:
Wear adequate clothes and work
gloves to clean the blade and the blade
deck and in all situations in which risk exists
for your hands.
HAZARD:
Never throw old oils, petrol or other
polluting products away into the environment.
HAZARD:
Blade sharpening and balancing
adjustment, including removal and refi tting, are
demanding operations which require specifi c
competence, as well as special equipment; especially
for safety reasons, these operations must be carried
out by a specialized after-sale centre. The same
applies to blade replacement with a new one.
HAZARD:
Any damaged or bent blades must
always be changed for safety reasons.
Always use original blades.
8.2. MACHINE CLEANING
Do not use high-pressure nozzles or aggressive liquids
to wash the casing and the engine.
ENGINE
Periodically clean the air fi lter (fi g 48-49) and check
the ignition plug electrodes (fi g. 50-52).
To service the engine, follow the instructions in the
attached engine manufacturer´s manual.
At the start of each reason, check the machine and
have it serviced by a specialized after-sales centre.
GRASS BAG
The grass bag can be cleaned by means of a strong
jet of water.
BLADE COVER
Washing the inside of the blade deck and of the grass
unloading pipe can be done as follows:
1) Position the machine on an outside fl oor.
2) Fit the grass bag.
3) Connect the fl exible water hose (fi g 53 part 1) at
junction (fi g 53 part 2) to the blade cover.
4) Sit in the seat and engage the parking brake;
move the gear lever to neutral “
N
”.
5) Move the blade cover to minimum level (full down)
6) Start the engine.
7) Allow the blade to turn for a few minutes.
Release the bag and rinse it with a strong jet of water.
8.3. DISMANTLING, SHARPENING AND BALANCING
THE BLADE
Check the blade is sharpened properly and fi rmly fi xed
to the bracket.
- A badly sharpened blade pulls at the grass and
causes the lawn to turn yellow.
- A loose blade causes unusual vibrations and can
be
dangerous.
WARNING!: All operations on the blade
(dismantling, sharpening, balancing, remounting
and/or replacing) require a certain familiarity
and special tools. For safety reasons, go to a
specialized centre if you do not have the right tools
or experience.
To remove the blade,
hold it fi rmly wearing
strong gloves and
undo the central
screw (1).
Summary of Contents for ATILA 162 B
