![background image](http://html1.mh-extra.com/html/gardner-denver/reavell-h5000-series/reavell-h5000-series_operators-handbook-manual_3870357089.webp)
ANCILLARY PARTS
PAGE 87
EXPANSION TANK WATER COOLING SYSTEM
SPECIAL INSTRUCTIONS FOR FILLING COMPRESSOR
BEFORE INITIAL STARTING
1.
FILLING AND BLEEDING THE WATER SYSTEM.
CAPACITY APPROXIMATELY 5215 & 5217 - 40 LITRES.
See before starting procedure in HANDBOOK in conjunction with the following.
1. Ensure all water drain plugs/cocks etc. are closed.
2. Remove expansion tank filler cap.
3. Fill system with clean fresh water.
4. Replace filler cap.
5. Start compressor, run for 2 minutes and stop.
6. Gently release filler cap, remove and top-up.
7. With filler cap removed, start compressor and slowly fill with water until all air bubbles in water
pipes are evacuated.
Note: any small air bubbles will evacuate during running through the vent pipe.
8. Replace filler cap.
TOPPING UP.
2. TOPPING
UP.
If hot, it is best to leave until cool before attempting to top-up cooling water.
1. Gently release filler cap,
2. Remove and top-up to required level.
3. Replace filler cap.
4. Start compressor, check for air bubbles in water pipes as above.
Summary of Contents for Reavell H5000 Series
