![background image](http://html1.mh-extra.com/html/gardner-denver/reavell-h5000-series/reavell-h5000-series_operators-handbook-manual_3870357011.webp)
SAFETY
PAGE 9
1.7.2
WARNINGS, CAUTIONS & NOTES
The following details for this Safety Section relate to ESSENTIAL SAFETY REQUIREMENTS referred to in
Machinery Directive 2006/42/EC.
Warnings call for attention to operating procedures involving specific hazards which could cause injury
or death and are identified by the following
RISK OF DANGER
RISK OF ELECTRIC SHOCK
RISK OF HIGH PRESSURE
RISK OF HOT SURFACE
RISK OF GAS EXHAUST
CONSULT MANUAL
1.7.3
GENERAL SAFETY PRECAUTIONS
When using cleaning solvents, local Health & Safety Regulations must be complied with. Provide good
ventilation and use suitable protection such as a breathing filter face mask, safety glasses, protective
apron and gloves.
Safety shoes should be compulsory in all workshops. Safety helmets must be worn if there is a risk of
falling objects.
If using compressed air for cleaning purposes, ensure safety regulations are complied with and
appropriate clothing worn. Never use compressed air to clean loose dirt from clothing.
Never direct compressed gas onto your skin or at other people.
Before releasing compressed air or gas through a flexible hose, make sure the free end is held securely
so that it cannot whip and cause injury.
1.7.4
INSTALLATION PRECAUTIONS
Installation work must only be carried out by competent personnel under qualified supervision.
A fused isolator switch must be fitted between the main power supply and the compressor. The isolator
shall be suitably sized and be in accordance with Section 7.2 of EN 60204-1:2006 & A1:2009.
If not requested with the supplied equipment, suitably sized over-current protection must be provided to
protect the power circuit. The protection shall be in accordance with Section 7.2 of EN 60204-1:2006 &
A1:2009.
Precautions must be taken to ensure that no injury is caused to passers by through loose clothing being
drawn into cooling air intake ducting or louvers.
Ensure that the discharge gas piping from the compressor module to the users pipework, gas storage
cylinders or gas dispensing system is free to expand and that no flammable material is within the
vicinity. If any such material is close-by take steps to preclude ignition.
Summary of Contents for Reavell H5000 Series
