![background image](http://html1.mh-extra.com/html/gardner-denver/reavell-h5000-series/reavell-h5000-series_operators-handbook-manual_3870357010.webp)
SAFETY
PAGE 8
1.5 CAUTION
Compressor sets designed for use with flammable gases are fitted with low inlet pressure switches.
These are an essential safety item. Their operation should be checked regularly. They must not be
tampered with or linked out of operation.
Should the gas inlet pressure fall to a low level and the switch has been linked out or made inoperable
there is a danger the compressor will draw in air. This could then form an explosive mixture within the
compressor. In extreme conditions it could also allow air to be drawn into the gas main with serious
implications for the general public.
1.6 DISPOSAL OF CONDENSATE AND USED PARTS
Whilst recyclable materials are used as far as possible, please ensure when disposing of condensate,
spent oil, used filter elements and any discarded parts or waste material of any kind make sure that there
is no pollution to any natural water-course, drain system and that no burning of waste takes place which
could cause pollution of the atmosphere.
Condensate, waste oil and used consumable items should be disposed of in line with Local Authority
regulations and Section 7.1.4 of EN 626-1:1994+A1:2008.
1.7 HEALTH AND SAFETY PRECAUTIONS
THE FOLLOWING HEALTH AND SAFETY PRECAUTIONS MUST BE READ IN CONJUNCTION
WITH ANY OTHER MANUFACTURERS EQUIPMENT SUPPLIED.
1.7.1
GENERAL
Operation, maintenance, repair or modifications to the compressor and its associated equipment
must only be carried out by competent persons under the control of a qualified supervisor.
The compressor safety relates to the document EN1012-1 Compressors and vacuum Pumps - Safety
Requirements, and the UK Pressure Systems Safety Regulations 2000.
Reavell re-fuelling stations are generally in accordance with International Gas Standards that apply
locally.i.e. UK LTD.
GE/GAS/UP
GERMANY
TUV
Most accidents which occur during the operation and maintenance of machinery are the result of failure
to observe basic safety rules or precautions. An accident can often be prevented by recognising a
situation that is potentially hazardous.
When handling, operating or carrying out maintenance on the station, personnel must observe safe
engineering practices and all relevant local regulations. The attention of users is drawn to the UK. Health
& Safety at Work Act 1974 and the Regulations of the Institution of Electrical Engineers.
Reavell cannot anticipate every possible circumstance which might represent a potential hazard. The
WARNINGS in this manual are therefore not all inclusive. If the user employs an operating procedure, an
item of equipment or a method of working which is not specifically recommended by Reavell, then they
must ensure that the unit will not be damaged or made unsafe and that there is no risk to persons or
property.
Failure to observe the precautions listed in the ‘HEALTH AND SAFETY PRECAUTIONS’ section may be
considered dangerous practice or misuse of the compressor.
Read and understand all WARNINGS, CAUTIONS & MANDATORY LABELS on the compressor before
operating, carrying out maintenance or servicing.
Summary of Contents for Reavell H5000 Series
