![background image](http://html1.mh-extra.com/html/gardner-denver/electra-saver-g2/electra-saver-g2_operating-and-service-manual_3874922026.webp)
13-21-611 Page 25
3-4
Quick Start Guide
For your convenience, the following excerpt from the Controller Operating and Service Manual is presented
to assist in programming the basic operating parameters. However, we strongly recommend you read the
Controller Operating and Service manual before attempting operating the compressor package.
The AirSmart™ G2 controller will automatically boot to the Home Screen after applying power to the
machine. Follow the steps below to log in to the controller, verify the pressure setting and operating mode,
and start the compressor.
Logging In
The
Login
operation for menu access is found under the
Main Menu
. Logging in is required to access any
screens other than the main Operating screens.
1. From the Home screen, select the
Menu
button
as shown in Figure 3-1.
Figure 3- 1: Home Screen
2. From the
Main Menu
, select the
Login
button
as shown in Figure 3-2. The
Select User
menu will appear as shown in Figure 3-3.
Summary of Contents for ELECTRA-SAVER G2
