![background image](http://html1.mh-extra.com/html/gardner-denver/electra-saver-g2/electra-saver-g2_operating-and-service-manual_3874922031.webp)
13-21-611 Page 30
3-9
Setting the Unload Pressure
1. Press the
Back
button to return to the previous screen. The
Load/Unload Setpoints
menu will
be displayed.
2. From the
Load/Unload Setpoints
menu
,
use the navigational buttons and select
Unload
Pressure
.
3. Press the
Enter
button. The
Unload Pressure
numeric keypad will appear as illustrated by
Figure 3-9.
Figure 3- 9: Unload Pressure Numeric Key Pad
4. Enter the
Unload Pressure
to the first decimal by using the navigational buttons to choose the
appropriate numeric value as indicated by the white highlight (CLR in Figure 3-9). The
Select
button is used to enter the number or function currently highlighted. When the unload pressure
has been entered, navigate to and select ENTER when complete, or simply press the
Enter
button to apply the value. If the value entered is within the valid range, the number will turn
green in the entry pad to show its acceptance. If the value is not accepted, the number will turn
red momentarily and the value displayed on the keypad will revert back to the current setting.
If this occurs, check the value entered against the
Min
and
Max
values above the keypad. The
Unload Pressure
will control at which pressure the compressor unload and stops.
Summary of Contents for ELECTRA-SAVER G2
