![background image](http://html1.mh-extra.com/html/gardner-denver/electra-saver-g2/electra-saver-g2_operating-and-service-manual_3874922032.webp)
13-21-611 Page 31
3-10
Setting the Load Pressure
1. Press the back button to return to the previous screen. The
Load/Unload Setpoints
menu will be
displayed.
2. From the
Load/Unload Setpoints,
use the navigational buttons and select
Load Pressure
.
3. Press the
Enter
button. The
Load Pressure
numeric keypad will appear as illustrated by Figure 3-
10
.
Figure 3- 10: Load Pressure Numeric Key Pad
4. Enter the
Load Pressure
to the first decimal by using the navigational buttons to choose the
appropriate numeric value as indicated by the white highlight (CLR in Figure 3-6). The
Select
button
is used to enter the number or function currently highlighted. When the load pressure has been
entered, navigate to and select ENTER when complete, or simply press the
Enter
button to apply
the value. If the value entered is within the valid range, the number will turn green in the entry pad
to show its acceptance. If the value is not accepted, the number will turn red momentarily and the
value displayed on the keypad will revert back to the current setting. If this occurs, check the value
entered against the
Min
and
Max
values above the keypad. The
Load Pressure
is the pressure
that the compressor will begin producing air again after unloading.
Summary of Contents for ELECTRA-SAVER G2
