Setting the trimmer to body
height:
o
1
h
t
Setting the shaft length:
v
Loosen the clamping sleeve
t
, extend the handle
1
to the
desired shaft length and re-tighten the threaded collar
t
.
The clamping sleeve
t
must be fastened firmly enough to
prevent the shaft from being moved.
Setting the additional handle:
v
Pull the lock
o
belonging to the additional handle
h
,
set the additional handle
h
to the desired incline and
release the lock
o
.
If the trimmer is correctly set to the body height, the posture
is upright and the trimmer head in
working position 1 is tilted
forwards slightly.
v
Hold the trimmer by the handle
1
and additional handle
h
in
such a manner that the trimmer head is tilted forwards slightly.
Adjusting the plant guard:
ö
ö
Working position
Parking position
v
Turn plant guard
ö
through 90° into the required position
until it locks into place.
Starting the trimmer:
a
p
Switching the trimmer on:
1. Press and hold the safety lock
p
and then press the start
button
a
on the handle.
2. Release the safety lock
p
again.
Switching the trimmer off:
v
Release the start button
a
on the handle.
5. Storage
To put into storage:
The product must be stored away from children.
1. Charge battery.
2. Store your Turbotrimmer in a dry place where it is protected
from frost.
Recommendation:
The trimmer can be suspended by the handle.
The trimmer head is not placed upon any unnecessary
strain if stored in a suspended manner.
20
EN
