background image

 

Cordless Edge and Hedge Trimmer with LED Indicator 

Cat. No.: 27421 

WARNING:   

Read the instructions thoroughly before operating the tool and keep this manual for future reference! 

 

● 

INTENDED USE

 

Your hedge trimmer has been designed for trimming hedges, shrubs and brambles, and grass shear is for trimming grass 

only, not to be used for any other purpose. This tool is intended for consumer use only. 

Your charger has been designed for charging batteries of the type supplied with this tool, NOT ALLOWED TO CHARGE 

OTHER BATTERIES. 

● EXPLANATION OF SAFETY SYMBOLS

 

                                                                               

 

                                                                               

 

 

 

SAFETY INSTRUCTIONS 

· 

Warning!

 Carefully observe the instructions in this manual to reduce the risk of personal injury or material damage. 

· Read this entire manual carefully before operating the tool. 

· Before operating the tool, make sure that you know how to switch the tool off in an emergency . 

· Retain this manual for future reference. 

 

General Safety Rules   

WARNING!

 Read all instructions, failure to follow all instructions listed below may result in electric shock, fire and/or serious 

injury. The term “power tool” in all of the warnings listed below refers to your battery operated (cordless) power tool. 

SAVE THESE INSTRUCTIONS 

1) Work area 

a) Keep work area clean and well lit.

 Cluttered and dark areas invite injuries. 

b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or 

dust.

 Power tools create sparks which may ignite the dust or fumes. 

c) Keep children and bystanders away while operating a power tool.

 Distractions can cause you to lose control. 

2) Electrical safety 

a) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.

 

There is an increased risk of electric shock if your body is earthed or grounded. 

b) Do not expose power tools to rain or wet conditions.

 Water entering a power tool will increase the risk of electric 

shock. 

Caution!   

 

Read the operating instructions!

 

Danger due to materials blown out of machine!   

 

Remove persons in the vicinity from the danger 

area!

 

Caution! 

Cutting means continues to run after the 

motor is switched off! 

 

Do not expose the device to the damp! 

 

Wear ear and eye protection!

 

Summary of Contents for 27421








Reviews: