ö
3
0
l
k
q
ß
A1
ß
A2
7.
Only for art. 9825: Place both halves of the impeller
k
around
the lower groove
l
of the trimmer head
3
and close until they
audibly engage.
8. From the front, push the plant guard
ö
into the upper
groove
0
of the trimmer head
3
. In doing so, ensure that
the impeller
k
can rotate freely (i.e. insert the bow with
the kink pointing upwards).
9. Place the protective cover
q
on top of the trimmer head
3
.
10. Turn the protective cover
q
until it can be pushed over the
trimmer head entirely (the two arrows
ß
A1
,
ß
A2
are directly across
from each other).
11. Rotate the protective cover
q
anti-clockwise until it audibly
engages.
12. Slightly widen the magazine
w
at the open point and slide onto
the shaft
2
.
13. Slide up to 6 plastic blades
e
into the magazine
w
until the
blades clamp into place.
6 plastic blades and a magazine for spare blades are included in
the delivery. Up to 6 spare blades can be stored in the magazine.
For information regarding the assembly of the blade into
the blade holders, please consult 7. Troubleshooting
“Replacing the plastic blade”.
3. Initial Operation
Charging the battery:
WARNING!
Overvoltage damages batteries and the battery
charger.
v
Ensure the correct mains voltage.
Before using for the first time, the battery must be fully charged.
Charging time (for uncharged battery) see 9. Technical Data.
The lithium-ion battery can be charged in any state of charge,
and the charging process can be interrupted at any time without
harming the battery (no memory effect).
17
EN
