RC1xx LED Lighting Controllers - User Manual
—
10
—
The RC1xx has an ingress rating of IP20 and it should be sited so that water
or dirt cannot enter the unit.
6
Connecting the RC1xx
Refer to Section 11, “RC1xx reference information” for the ratings of the
connections. The RC1xx’s connections are shown below (an RC120 is
illustrated):
6.1
Power
Any power supply derived from mains electricity must have a Safety Extra
Low Voltage (SELV) output. Route low voltage wiring to the RC1xx controller
separately from mains electricity wiring. If this is not possible, make sure
the low voltage wiring has an insulation rating that is appropriate or
supplementary insulation is used. The connections are shown below:
6.2
Lighting output
Note:
Make sure you set up the current or voltage rating for the light
before you connect it See Section 10.1, “Lighting setup”.
