Ganz ZN8 Series User Manual Download Page 66

Page: 66 / 72

Network Video Recorder
User Manual

Contents

Issue: V1.0 (2016-01-20)

Step 5

Check the channel PTZ text field and choose the channel number and preset number
from the drop-down menu to enable the channel PTZ linkage function.

Step 6

Check the alarm out text field, and choose the alarm output channel number and set the
alarm time to enable the alarm output linkage function.

Step 7

Check the send email text field and enable the email linkage function.

Step 8

Click

Apply

The message “Apply success” is displayed.

Step 9

Click

Confirm

The system saves the settings.

7.2.6 Privacy Masking

Step 1

Click

Setup

Camera Setup > Privacy Masking

The Privacy Masking page is displayed, as shown in Figure 7-31.

Figure 7-31

Privacy Masking

interface

Step 2

Click the button on to enable Privacy Masking.

Step 3

Press and hold the left mouse button, and drag on the preview image to cover the part
to be masked.



Click the right mouse button on the preview image to clear the masked area.



You can click

Reset

to configure the masked area again.

Step 4

Click

Apply

The message “Apply success” is displayed.

Summary of Contents for ZN8 Series









































































Search results

Summary of Contents for ZN8 Series

Reviews:

Related manuals for ZN8 Series

Brands by name

Popular brands

Ganz ZN8 Series, User Manual

Search results

Summary of Contents for ZN8 Series

Reviews:

Related manuals for ZN8 Series

Brands by name

Popular brands