Ganz ZN8 Series, User Manual

Page: 33 / 72

Network Video Recorder
User Manual
Issue: V1.0 (2016-01-20) 27
Parameter Description Setting
Subnet Mask Subnet mask of the NVR [How to set]
Enter a subnet mask in the
corresponding field.
[Default value]
255.255.255.0
Default
Gateway IP address of the gateway through
which a client accesses the NVR [How to set]
Enter the IP address of the
gateway in the
corresponding field.
[Default value]
192.168.1.1
Preferred DNS
Server IP address of the DNS server [How to set]
Enter the IP address of the
DNS server in the
corresponding field.
[Default value]
8.8.8.8
Step 3 Click Apply .

The "Apply success" prompt is displayed. Click OK .

If another prompt is displayed, check whether the parameters meet requirements
and re-set the parameters if necessary.
-
7.1.4 Device Port
You must configure the HTTP port, control port and RTMP port for device route
mapping in a LAN.
Step 1 Choose Setup > NVR Setup > Device Port .
The Device Port interface appears, as shown in Figure 7-4.