Ganz ZN8 Series, User Manual

Page: 45 / 72

Network Video Recorder
User Manual
Issue: V1.0 (2016-01-20) 39
Step 2 Set the parameters according to Table 7-6.
Table 7-6 PPPoE parameters
Parameter Description Setting
SMTP N/A [Setting method]
Select the check box.
SMTP Server
Address IP address of the SMTP server. [Setting method]
Enter a value manually.
SMTP Server
Port Port number of the SMTP server. [Setting method]
Enter a value manually.
[Default value]
25
User Name User name of the mailbox for
sending emails. [Setting method]
Enter a value manually.
Password Password of the mailbox for
sending emails. [Setting method]
Enter a value manually.
Sender E-mail
Address Mailbox for sending emails. [Setting method]
Enter a value manually.
Recipient_E-
mail_Address1 (Mandatory) Email address of
recipient 1. [Setting method]
Enter a value manually.
Recipient_E-
mail_Address2 (Optional) Email address of
recipient 2.
Recipient_E-
mail_Address3 (Optional) Email address of
recipient 3.
Recipient_E-
mail_Address4 (Optional) Email address of
recipient 4.
Recipient_E-
mail_Address5 (Optional) Email address of
recipient 5.
Transport Mode Email encryption mode. Set this
parameter based on the
encryption modes supported by
the SMTP server. [Setting method]
Select a value from the
drop-down list box.
[Default value]
No Encrypted
Step 3 Click Apply .

If the message "Apply success" is displayed, click OK . The system saves the
settings.

If other information is displayed, set the parameters correctly.
-