Ganz ZN8 Series User Manual Download Page 41

Page: 41 / 72

Network Video Recorder

User Manual

Issue: V1.0 (2016-01-20)



Unload and format hard disks.

When using the NVR for the first time, format the hard disks loaded to the NVR; otherwise,
video files cannot be written to the hard disks.

Choose

Setup

NVR Setup

Record

Storage

The

Storage Configuration

interface appears, as shown in Figure 7-11.

Figure 7-11

Storage Configuration

interface

Before removing a hard disk from the NVR, unload the hard disk.

7.1.8 Network Service

DDNS

Connect the specified camera to the Internet, and obtain the user name and password
for logging into the Dynamic Domain Name System (DDNS) server.

Step 1

Choose

Setup

NVR Setup

Network Service

DDNS

The DDNS page is displayed, as shown in Figure 7-12.

Summary of Contents for ZN8 Series









































































Search results

Summary of Contents for ZN8 Series

Reviews:

Related manuals for ZN8 Series

Brands by name

Popular brands

Ganz ZN8 Series, User Manual

Search results

Summary of Contents for ZN8 Series

Reviews:

Related manuals for ZN8 Series

Brands by name

Popular brands