Ganz ZN8 Series, User Manual

Page: 44 / 72

Network Video Recorder
User Manual
Contents
38 Issue: V1.0 (2016-01-20)
Table 7-5 PPPoE parameters
Parameter Description Setting
PPPoE Indicates whether to enable the
PPPoE service. [Setting method]
Click the button on.
[Default value]
OFF
Account PPPoE user name provided by the
network carrier. [Setting method]
Enter a value manually.
Password Password provided by the
network carrier. [Setting method]
Enter a value manually.
Step 3 Click Apply .

If the message "Apply success" is displayed, click OK . The system saves the
settings.

If other information is displayed, set the parameters correctly.
-
SMTP
If the Simple Mail Transfer Protocol (SMTP) function is enabled, the device
automatically sends JPG images and alarm information to specified email addresses
when an alarm is generated.
Step 1 Choose Setup > NVR Setup > Network Service > SMTP .
The SMTP page is displayed, as shown in Figure 7-14.
Figure 7-14 The SMTP interface