Ganz ZN8 Series User Manual Download Page 48

Page: 48 / 72

Network Video Recorder
User Manual

Contents

Issue: V1.0 (2016-01-20)

Parameter

Description

Setting

Alarm Out
Mode

When the device receives I/O
alarm signals, the device sends
the alarm information to an
external alarm device in the mode
specified by this parameter. The
options include the switch mode
and pulse mode.

NOTE

If the switch mode is used, the
alarm frequency of the device must
be the same as that of the external
alarm device.

[Setting method]

Select a value from the
drop-down list box.

[Default value]

Switch Mode

Manual Control

Control the alarm output.

[Setting method]

Click Start or Stop.

Step 3

Click

, the system saves the settings.

Disk Alarm

Step 1

Choose

Setup

NVR Setup

Alarm > Disk Alarm

The

Disk

Alarm

interface appears, as shown in Figure 7-18.

Figure 7-17

Disk Alarm

interface

Step 2

Click the button ON to enable disk full alarm (disk error alarm, no disk alarm)
function.

Summary of Contents for ZN8 Series









































































Search results

Summary of Contents for ZN8 Series

Reviews:

Related manuals for ZN8 Series

Brands by name

Popular brands

Ganz ZN8 Series, User Manual

Search results

Summary of Contents for ZN8 Series

Reviews:

Related manuals for ZN8 Series

Brands by name

Popular brands