manualshive.com logo in svg

Ganz Thermal Series, User Manual, Page: 49 / 71

Share
Download
Ganz Thermal Series User Manual Download Page 49

Ganz 

Thermal

 Series User Manual

  

 

 

 

34 

Table 13: Video Streaming 

Video 
Streaming

 

Description

 

Enable 
Multicast 
Streaming  

Check this box to select multicast streaming. Make sure your network 
supports multicasting. Leave the box as unchecked for unicast streaming. 
The default is unicast streaming. 

H264 Multicast 
Streaming IP 
Address 

Enter the multicast streaming address. Valid range for multicast IP 
address is between 224.0.0.0 and 239.255.255.255. Typical multicast IP 
address is 239.x.y.z 

H264 Multicast 
Streaming Port 

Enter the multicast streaming port number. Port number can vary 
between 1 and 65535. Default value is set to 554. 

H.264 Bitrate 

Select the appropriate bit rate for H264 video by using the slider. The 
available range is between 64Kbps to 2500Kbps. This is a common 
setting for both unicast and multicast. 

H.264 Frame 
rate 

Select a frame rate from 5-30. This setting is used for both unicast and 
multicast.  

H264 Network 
Cache 

Amount of time in milliseconds (ms) that the embedded VLC player will 
cache. Settings too high may cause latency between live action and 
stream display. Settings too low may cause instability in the stream 
display. Default value is optimum for the default frame rate. 

H.264 RTSP 
Port 

Allows for setting of a custom port for RTSP streaming. 

MJPEG 
Multicast 
Streaming IP 
Address 

Enter the multicast streaming address. Valid range for multicast IP 
address is between 224.0.0.0 and 239.255.255.255. Typical multicast IP 
address is 239.x.y.z 

MJPEG 
Multicast 
Streaming Port 

Enter the multicast streaming port number. Port number can vary 
between 1 and 65535. Default value is set to 6001. 

MJPEG Quality 

Select the appropriate bit rate for H264 video by using the slider. The 
available range is 5% to 98%. This is a common setting for both unicast 
and multicast. 

MJPEG Frame 
rate 

Select a frame rate from 1-30. This is a common setting for both unicast 
and multicast.  

MJEPG 
Network Cache 

Amount of time in milliseconds (ms) that the embedded VLC player will 
cache. Settings too high may cause latency between live action and 
stream display. Settings too low may cause instability in the stream 
display. Default value is optimum for selected frame rate. 

MJPEG RTSP 
Port 

Allows for setting of a custom port for RTSP streaming. 

 

 

Summary of Contents for Thermal Series








































































Reviews:

No comments