Ganz PIXELPRO SERIES, Interface Manual

Page: 92 / 111

Printed Documentation
84
No movement (dead) zone
Percentage of screen width/height in the centre of the image where the PTZ won’t attempt
to track the subject, normalized as a percentage(0-100%). In most cases this value does not
need to be adjusted and values of between 15-20% should give satisfactory results.
Minimum target size for zooming in
Minimum target size (percentage of image width/height) to trigger the camera to zoom-in,
normalized as a percentage (0-100%). Any object size smaller than this value will cause the
camera to zoom in. The default value is 20%.
Maximum target size for zooming out
Maximum target size (percent of image width/height) to trigger the camera to zoom-out,
normalized as a percentage (0-100%). Any object size larger than this value will cause the
camera to zoom out. The default value is 50%.