Ganz PIXELPRO SERIES, Interface Manual

Page: 99 / 111

Stabilizer
91

Low Detail: When this option is enabled, the algorithm is disabled when a scene
with insufficient detail for reliable stabilization is detected. This prevents the image
position 'hunting’ when there is very little scene detail or features. For example,
when the camera is pointed at a completely blank wall the stabilized image will jump
around slightly because it is locking on to the random video noise. Similar hunting
problems can occur in other situations where a large part of the scene lacks suitable
detail for Stabilizer lock.
Performance
Performance setting of the algorithm. Better stabilization performance comes at the
expense of higher DSP load. The default setting is low.
Maximum Frame Shift
This is the maximum amount in image pixels that the algorithm will shift the frame
horizontally and vertically in either direction from the normal position. Both horizontal and
vertical shifts are configurable in the range [24 - 256], the default is 128.