Ganz PIXELPRO SERIES, Interface Manual

Page: 86 / 111

Printed Documentation
78
Return to Home Position Following Manual Override
When checked, the PTZ camera will automatically return to the VCA home position following
user control of the camera (manual override) after the specified timeout has elapsed.
NOTE: If this function is disabled and the VCA is enabled only at the preset home position,
VCA will not be automatically re-enabled. The only way to re-enable VCA in this mode is to
manually return the camera to the VCA home preset position.
PTZ Auto-tracking Configuration
PTZ auto tracking allows a compatible PTZ camera to track a moving subject in real-time.
When a subject is detected, the PTZ camera zooms in on the subject and moves to track it
such that it remains in view of the camera.
The PTZ auto tracking is configured by the controls highlighted in the red box in the figure
below.