G&D VisionXS-C-TypeC-UHR, Manual

Page: 155 / 200

Configuration
G&D VisionXS-C-TypeC-UHR · 51
English
Configuration settings
Operating modes of console modules
Depending on the application of the KVM extender, you can select one of the fol-
lowing operating modes:
 OpenAccess mode:
In this mode, access to the KVM extender is
not
protected by
authentication.
You can configure the same access rights for both a KVM extender and a user
account.

Standard mode: The default mode allows access to the KVM extender only after
users are authenticated with their username, password, and 2-factor authentication
if set up.
User rights can be configured in the individual user account.
How to select the operating mode of the KVM extender:
NOTE: This operating mode is set by default .
IMPORTANT: The configured access rights apply to all users working with this
KVM extender.
NOTE: This operating mode is set by
default
, if you use the extender as a
matrix
switch module
(see
Optional connection to a KVM matrix switch
on page 4).
OSD
1. Press
Ctrl+Num
(
default
) to open the OSD.
2. Select the row
Console setup
and press
Enter
.
3. Under
Console type
, select one of the following options:
OpenAccess
 OpenAccess mode (
default
)
Standard
 Standard mode
4. Press
F2
to save your settings.