G&D VisionXS-C-TypeC-UHR, Manual

Page: 114 / 200

Installation
10 · G&D VisionXS-C-TypeC-UHR
Establishing a connection to the console module
Transmission 1: Plug a category 6 (or better) twisted pair cable, which is available as
accessory, into this interface. Connect the other end of the cable to the respective
interface of the console module or to one of the Dynamic Ports of a compatible matrix
(see page 4).
The activation of the
Transm. Redundancy
feature activates the
Transmission 2
inter-
face.
Use the
Transmission 2
interface to establish a connection with a second counter-
part.
Transmission 1 Service Pwr Main Power Transmission 2 Red. Power Network Service Pwr Main Power Transmission 2 Red. Power Network