G&D VisionXS-C-TypeC-UHR, Manual

Page: 111 / 200

Installation
G&D VisionXS-C-TypeC-UHR · 7
English
Installing the computer module
The computer, whose signals are transmitted to the remote console, is connected to
the VisionXS-CPU computer module.
Establishing a connection to a local management network
Network: Insert a category 5 twisted pair cable (or better), which is available as acces-
sory. Connect the other end of the cable to the local network.
NOTE: All device variants of the
VisionXS
series can be operated with an
external
power supply at the
Power
interface (for DT variants:
Main Power
).
The products support USB Power Delivery. They can only be used as a power
receiver (sink,
Establishing the power supply
on page 11).
The illustrations in this chapter show the DT variant of the device series. This
variant is additionally equipped with an
internal
power supply (
Red. Power
).
NOTE: If desired, connect this network interface to a local network. This enables
you to access the Config Panel web application from this network and to send sys-
log messages to this network.
Service Transmission 2 Transmission 1 Pwr Main Power Red. Power Network Pwr Main Power Red. Power Service Transmission 2 Transmission 1