G&D DVIMUX8-OSD-USB, Installation And Operation Manual

Page: 93 / 140

Getting started
G&D DVIMUX8-OSD-USB · 19
English
How to start the
Autoscan
process:
1. Press Ctrl+Num (Standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the Arrow keys to choose Autoscan , and press Enter .
How to stop the
Autoscan
process:
1. Press Ctrl+Num (standard) to open the On-Screen Display or use a key combina-
tion to switch the channel.
Auto accessing active computers (Autoskip)
The Autoskip function accesses any active computer in sequence.
After each switching, an information display at the moni-
tor shows the name of the active computer, the name of
the KVM switch and the information SKIP .
How to start the
Autoskip
process:
1. Press Ctrl+Num (Standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the Arrow keys to choose Autoskip , and press Enter .
How to stop the
Autoskip
process:
1. Press Ctrl+Num (standard) to open the On-Screen Display or use a key combina-
tion to switch the channel.
NOTE: If the Autoskip function is enabled, your keyboard and mouse inputs are
transmitted to the active computer.
During your inputs, the
Autoskip function pauses and continues after you finish
your inputs.
NOTE:
In the default settings of the KVM switch, the Autoscan function accesses all
connected computers.
You can change this setting as described in the paragraph
Selecting computers to per-
form advanced switching functions on page 35.
CPU 1
DVIMUX8
SKIP