G&D DVIMUX8-OSD-USB, Installation And Operation Manual

Page: 98 / 140

Advanced functions
24 · G&D DVIMUX8-OSD-USB
How to stop the
Broadcast
mode:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the arrow keys to select Broadcast and press Enter .
Switching to computers by using a serial device
You can switch between channels by using a serial device that is connected to the
RS232
interface of the KVM switch.
The serial device can either be a special keypad or a computer with an installed ter-
minal emulator.
Connection settings
To establish a serial connection to the KVM switch, you need to apply the following
connection settings by using the serial device.

Bits per second: 115.200

Data bits: 8

Parity: none

Stop bits: 1

Flow control: none
ADVICE: After you open the on-screen display, press
F11
to start the
Broadcast
mode.
IMPORTANT: Switching between channels by using a serial device requires apply-
ing the connection settings listed below and using the switching commands of the
KVM switch.