G&D DVIMUX8-OSD-USB, Installation And Operation Manual

Page: 81 / 140

Installation
G&D DVIMUX8-OSD-USB · 7
English
Line In: If you want to put out the computer‘s audio signals over the speakers con-
nected to the KVM switch, use one of the audio connection cables ( Audio-M/M ) to
connect the computer‘s Line Out interface to this interface.
Line Out:
If you want to use a microphone or a headset at the console, use one of the
audio connection cables ( Audio-M/M ) to connect this interface to the computer‘s
microphone input.
USB 2.0: Use one of the USB connection cables ( USB-AM/BM ) to connect one of the
computer‘s USB ports to this interface.
DVI-I CPU:
If the computer provides a DVI-D video output, use a digital video cable
(
DVI-D-DL-M/M
). If the computer has an analog VGA output, use an analog video
cable ( VGA-M/DVI-A-M ).
Connect the computer‘s (first) video output to this interface.
Connecting the power supply
Power: Connect the power cable ( PowerCable-2 Standard ) to a power socket and the
Power socket of the KVM switch.
NOTE:
To connect the (maximum eight) computers to the KVM switch, the inter-
faces as shown below are available for each computer.
The descriptions (for example CPU 1 ) on the back panel assign the interfaces to a par-
ticular computer or to the respective button on the front panel.
Figure 3: Interfaces to connect the computers
NOTE: If you purchased the multi-channel variant of the KVM switch, connect the
computer‘s second video output to the DVI-I CPU x.2 interface.
Figure 4: Interface to connect the power supply
Monitor 1
Keyb./Mouse Speaker
CON
Line In Line In
CPU 1
DVI-I CPU 1
USB 2.0 Line Out
Line In
CPU 2
DVI-I CPU 2
USB 2.0 Line Out
Line In
CPU 8
DVI-I CPU 8
USB 2.0 Line Out Line Out
Line In
CPU 7
DVI-I CPU 7
USB 2.0
Power
Monitor 1
Keyb./Mouse Speaker
CON
Line In Line In USB 2.0 Line Out
CPU 7
DVI-I CPU 7.1
Power
Line In USB 2.0 Line Out
CPU 1
DVI-I CPU 1.1
Line In USB 2.0 Line Out
CPU 2
DVI-I CPU 2.1
Line In USB 2.0 Line Out
CPU 8
DVI-I CPU 8.1