G&D DP1.2-Vision-IP-Fiber, Installation And Operation Manual

Page: 193 / 240

Configuration
68 · G&D DP1.2-Vision-IP-Fiber
Configuration
The configuration of the KVM extender can be changed either using the on-screen
display (OSD) or the web application Config Panel :
 The OSD is shown on the console monitor. Most configuration settings can be
changed directly on the OSD of the console.
 The web application Config Panel provides a graphical user interface to configure
and monitor the KVM extender via web browser.
Overview of functions and default settings
The following table provides an overview of the configurable functions of the KVM
extender. It additionally lists the default settings and references to detailed descrip-
tions of the functions.
Function Default setting Page
Operating modes of console modules OpenAccess 70
Renaming a console module 71
Renaming a target module 71
Changing your password 72
Selecting the language German 72
Changing hotkeys Ctrl 73
Changing the OSD key Num 74
Opening the OSD via double keypress turned off 75
Channel switching when using a DH computer module Cursor left, right 76
Changing the exclusive key
Print
77
Changing the time span of the input lock 1 second 78
Right for exclusive access to the console given 79
Adjusting the operating mode of the RS232 interface RS232 80
Changing the video mode of consoles always on 81
Activating a console after the permanent switch-off of the
image display
Keyboard/Mouse 82
Active console after starting an extender None 83
Selecting the EDID mode of the KVM extender auto 84
Reducing the colour depth of the image data to be transmitted 24 bit 85
Freeze mode disabled 86
Enabling or disabling DDC/CI support disabled 87
(De)Activating an USB keyboard mode the »Generic USB« mode PC Multimedia 88