G&D DP1.2-Vision-IP-Fiber, Installation And Operation Manual

Page: 200 / 240

Configuration
G&D DP1.2-Vision-IP-Fiber · 75
English
Opening the OSD via double keypress
As an alternative to opening the OSD with the hotkey
Num
or
Double hot-
key+Num
you can also open the OSD by pressing a configured key twice.
How to enable/disable the activation of the OSD via double keypress:
OSD
1. Open the remote OSD of the computer module by pressing the
remote hotkey
(
default
:
Ctrl+Num
), if you want to change the hotkey for the remote OSD.
Open the local OSD of the console module by pressing the
local hotkey
(
default
:
Alt+Num
), if you want to change the hotkey for the local OSD.
2. Select the row
System setup
and press
Enter
(remote OSD) or
F11
(local OSD).
3. Select the row
Hotkey
and press
Enter
.
4. Under
OSD via 2x keypress
select one of the following options:
Off
 OSD cannot be opened via double keypress (
default
)
Ctrl
 OSD is opened by pressing the
Ctrl
key twice
Alt
 OSD is opened by pressing the
Alt
key twice
Alt Gr
 OSD is opened by pressing the
Alt Gr
key twice
Win
 OSD is opened by pressing the
Windows
key twice
Shift
 OSD is opened by pressing the
Shift
key twice
Print
 OSD is opened by pressing the
Print
key twice
The following additional options are only available in the local OSD:
Cursor left
 OSD is opened by pressing the
Cursor left
key twice
Cursor right
 OSD is opened by pressing the
Cursor right
key twice
Cursor down
 OSD is opened by pressing the
Cursor down
key twice
Cursor up
 OSD is opened by pressing the
Cursor up
key twice
5. Press
F2
to save your settings.