Gamma Piu Vapor STYLER INFRARED, User Manual

Page: 13 / 160

13
Standby mode
For greater safety, the appliance will automatically switch-off
after an hour of inactivity, while remaining connected to the
mains.
Press the ON/OFF
[C] button again to turn on the appliance.
Empty the tank in case of infrequent use.
HAIRSTYLING TIPS
This professional hair straightener becomes
very hot. We recommend that utmost attention
be paid to the condition of the hair that is to be
treated, especially in the case of bleached and
deconstructed hair. We recommend a maximum
of 3 seconds of application and to always test a
hidden lock in advance.
• Wash your hair as usual, dry and brush it to untangle any knots.
• After drying, do not use hairspray, mousse or gel.
• Take a thin lock of hair between your fingers as wide as the
heating plate and place it between the plates.
• Close the hair straightener and hold the lock taut with one
hand while sliding the straightener with the other hand from
the roots to the ends to straighten the hair or open and close
the plate, moving it from time to time for the frise version.
• Start styling from the nape of the neck and then move on to
the sides and lastly to the front.
• Continue until the hairstyle is complete.
• Switch the hair straightener off after each use.
MAINTENANCE
In case of malfunction or damage to the
appliance or a part of it, the appliance must be
analysed by the manufacturer or the relevant
technical assistance or in any case by a person
with similar skills in order to prevent any risk.
The user must not disassemble the device him/
herself.
After each use
clean the appliance.
GENERAL CLEANING
• Always disconnect the power cord from the mains socket
and make sure the straightener is completely cool before
cleaning.
•
Avoid all risk of electric shock by not cleaning the
appliance with water and do not immerse it in water.
•
Do not use abrasive solutions or concentrated
detergents.
• Clean the exterior with a soft cloth or slightly damp cloth.
• Clean the heating plates with a slightly damp cloth and a
mild detergent.
• After use, make sure that all parts are completely dry.