FPT Gateway Configuration
FPT Gateway Configuration Procedure
28
FocalPoint™ Gateway Installation & Operation Manual - P/N: 52649:Rev: B3 2/11/10
Time Zone Configuration
Step 6. Click on the Time Zone Configuration entry in the Nodes column.
Figure 3.5 Gateway Time Settings
Step 7. Click in the Value field adjacent to GMT Minute Offset Property, type in the entry, and
then press the keyboard enter key.
The GMT Minute Offset is to used synchronize the time of day between the gateway and
SNPT Server.
• Use this formula to determine the setting: the US Central Time is minus 6 hours
from GMT, therefore your calculation would be -6 (hours) x 60 (minutes) = -360
minutes.
Step 8. Click in the Value field adjacent to Observe DST and then select True if you want the
gateway to automatically increment or decrement time of day according to Time Zone
Reference setting.
Step 9. Click in the Value field adjacent to Time Zone References field and then select from these
choices:
• US Standard - When selected the DST Begin and DST End settings are automatically
populated with the appropriate settings.
• EU Standard - When selected the DST Begin and DST End settings are automatically
populated with the appropriate settings.
• Custom - When selected you are require perform DST Begin and DST End settings.
Refer to
“DST Begin/DST End” on page 40
.
Step 10. Now you need to perform
“Login Password Settings” on page 29
.
