FPT Gateway Configuration Procedure
FPT Gateway Configuration
25
FocalPoint™ Gateway Installation & Operation Manual - P/N: 52649:Rev: B3 2/11/10
Step 4. Change the default FPT Gateway IP address so it will be added onto your IP network.
The gateway default IP values are:
• IP Address: 192.168.1.2
• Subnet Mask: 255.255.255.0
• Gateway: 0.0.0.0
Figure 3.3 Gateway IP Configuration
a.
Click on the IP Configuration entry in the Nodes column.
b. Click on the Value field adjacent to IP Address Property and then type in the address the
FPT Gateway will be using on your IP network.
c.
Press the keyboard enter key.
d. Click in the Value field adjacent to Subnet Mask Property and then type in the subnet
address of the FPT Gateway.
e.
Press the keyboard enter key.
f.
If the FocalPoint™ Gateway is connected to an Ethernet network with an IP Gateway, or
IP Router, enter the IP address of the appropriate IP Gateway.
g. Press the keyboard enter key.
Step 5. Select View >Refresh Gateway List.
Step 6. Click on the Address fields down arrow and then select the new gateway address from the
list of choices.
Step 7. Now you need to perform
“Panel Configuration Settings” on page 26
.
NOTE:
To return the gateway to the factory default IP Configuration setting values use the Mode
button on the GW PC board. Refer to
Figure 2.1 on page 14
.
