G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
Centric 3x480 Vac, Installation Guide, rel. 2.2
31
4.3.6
Powering-up the system
1.
Read the material in section
6 on page 43, up to and including section
6.2.
Perform the instructions in section
6.2 “Insertion of power modules at system installation”.
2.
Switch ON the external bypass input circuit breaker.
3.
Switch ON the rectifier ac input circuit breaker.
4.
The Centric’s LCD panel should switch ON automatically.
If the screen is dark, it may be that the screen-saver is operating. Touch the screen to see if the
display lights up. If not, pressing the on/off button on the LCD panel should switch the screen ON.
5.
Verify
that the batteries have been connected to the Centric with proper polarity,
then switch ON the battery circuit breaker (on the battery box).
6.
A series of screens are displayed on the control panel to enable you to define the system's initial
configuration. To perform the initial configuration, continue with section
4.4 below.
