© Galvin Engineering Pty Ltd
Product Installation Guidelines
Version 1, 19 October 2022, Page
13
of
25
5. Re-fit service cartridges and then reassemble faceplate and spout (See section 7.0 Installation steps 6 to 8).
10.2.2 THERMOSTATIC CARTRIDGE
1. Disassemble spout and faceplate (refer to 10.2.1
Strainer And Non-Return Valves step 1).
2.
Turn the s t ng v ves t ‘C O E’ p s t n
3. Break/remove the plastic lock in the center of the
thermostatic mixing valve.
4. Use spanner size 28mm and turn the cartridge in
the counterclockwise fashion until it reached the
end of its threads. Pull the thermostatic cartridge
out of the mixer body.
Plastic ring
