Galletti Ductimax, Technical Manual

Page: 21 / 52

UT66002214-05
All copying, even partial, of this manual is strictly forbidden
21
12 ELECTRICAL CONNECTIONS
Make the electrical connections with the power supply discon-
nected, in accordance with current safety regulations.
All the wiring must be done by qualified personnel.
For each thermal ventilating unit provide a main circuit
breaker (IL), with opening contacts separated by at least 3
mm and an adequate protection fuse (F).
Electrical intakes are shown on the rating labels on the units.
During installation, strictly abide by the indications on the wir-
ing diagram for the unit-control panel combination.
See electrical wirings from page 13.1 p. 22.
DUCTIMAX 13-14 6-speed motor (+ EVO/ MYCOMFORT / TED)
DUCTIMAX 23-54 7-speed motor (+ EVO/ MYCOMFORT / TED)
DUCTIMAX 63-64 Motor 4 speed (+ EVO/ MYCOMFORT / TED)
NOTE: The electric wires (power and control circuits) must be
pulled in through the gland on the side of the electric box
where the plumbing connections are located and then con-
nected to the terminals.
WARNING: COMMON motor wire = WHITE, wrong connec-
tion may cause serious damages to the motor.