Galletti Ductimax, Technical Manual

Page: 43 / 52

UT66002214-05
All copying, even partial, of this manual is strictly forbidden
43
14 ACCESSORIES
E2TY - 2.8" touch screen user interface
Touch screen 2.8" user panel for EVO-2-TOUCH control EVO, frame in natural brushed aluminium. (to combined with EVO BOARD)
Main functions:
• 2.8'' capacitive touch screen display
• Integrated temperature and humidity probe
• Low-voltage power supply drawn from the power component
• Wall mounted
• Designed for the main electrical connection boxes
• User-friendly
• Aluminium foil and polyethylene frame with various chrome plating options
E2TK - 2.8" touch screen user interface
Touch screen 2.8" user panel for EVO-2-TOUCH control EVO, frame in aluminium color black RAL9005. (to combined with EVO BOARD)
Main functions:
• 2.8'' capacitive touch screen display
• Integrated temperature and humidity probe
• Low-voltage power supply drawn from the power component
• Wall mounted
• Designed for the main electrical connection boxes
• User-friendly
• Aluminium foil and polyethylene frame with various chrome plating options
TC - fan stop thermostat: elecromechanical thermostat for minimum water temperature during heating
Fan stop thermostat with automatic resetting, it stops the fan motor assembly when the water temperature in the heat exchanger decreases under the set value
(42°C). Usefull only in the heating mode for installation on the finned pack of the heat exchanger.
KP - power interface for connection of up to 4 units to a single control panel
The KP master sleeve can be installed to control with a single control panel up to 4 units (connected in parallel).
This accessory is designed for installation on a DIN drive, usually placed on electric board, can be matched with all DUCTIMAX versions.
MYCOMFORT BASE - GALLETTI wall-mounted microprocessor control, model MYCOMFORT BASE,
having the following main features:
• Room air temperature reading and adjustment
• Water temperature reading (water probe as an optional)
• Manual and automatic adjustment of fan speed
• Manual and automatic switching of heating and cooling mode depending on the water temperature within the heat exchanger or on the room temperature, with
a neutral zone that can be selected in the range from 2° to 5°C.
The controller is equipped with a large display (3”) to show and set all the functions of the unit.
MYCOMFORT MEDIUM - wall-mounted microprocessor control
having the following main features:
• Room air temperature reading and adjustment
• Room humidity reading and adjustment
• Water temperature reading (water probe as an optional)
• Manual and automatic adjustment of fan speed
• Manual and automatic switching of heating and cooling mode depending on the water temperature within the heat exchanger or on the room temperature, with
a neutral zone that can be selected in the range from 2° to 5°C.
• Serial port for Bus connection
The controller is equipped with a large display (3”) to show and set all the functions of the unit.
MYCOMFORT LARGE - wall-mounted microprocessor control
having the following main features:
• Room air temperature reading and adjustment
• Room humidity reading and adjustment
• Water temperature reading (water probe as an optional)
• Manual and automatic adjustment of fan speed
• Manual and automatic switching of heating and cooling mode depending on the water temperature within the heat exchanger or on the room temperature, with
a neutral zone that can be selected in the range from 2° to 5°C.
• Clock and hourly timer-programmed operation
• 2 Analogue outputs for controlling modulating evices -10V
• 2 Digital outputs for controlling (On/Off) external devices (novoltage contacts)
• Serial port for Bus connection
The controller is equipped with a large display (3”) to show and set all the functions of the unit.
DIST - MYCOMFORT controller spacer for wall mounting
ABS wall mounting support to separate the MYCOMFORT controllers from the wall.