7
8
1
2
3
(7) Attach the earthstraps to the central bolt as shown using two washers (behind
and in front of strap terminators);
(8) Coil excess cable and secure with cable ties as shown.
Cables
MUST NOT
be shortened as they are calibrated for each individual sensor.
2.3.2 Connecting the Upper Manifold Hoses
(1) Place a jubilee clip over the end of each vapour hose which is attached to the end
of each vapour pipe that comes down from the upper manifolds;
(2) Fit each hose over the brass fitting of the chromed gooseneck pipes and secure;
(3) Cover the join with 15cm of self-vulcanising tape, stretching it to approximately
two thirds its width as it is applied.
31
APOLLO 3000L VR2 COMPONENTS INSTALLATION
2A03229 APOLLO 3000L Installation and Commissioning Manual Issue 1
